67-69 Camaro Frame Connecters
Under the high torsional load of high speed cornering a unibody platform Camaro can actually twist, causing changes in geometry and unpredictable handling. Cheap bolt in type frame connecters are only partially effective, only a true weld-in connector like the Speedtech frame connecter system can provide the strength required to prevent that torsional twist.
Unique to all other brands, through an integrated crossmember Speedtech takes our frame connecters one step above the rest for the highest level of unibody chassis strengthening available! This kit strengthens the car in both a front to back AND side to side manner, and ties directly into the factory front and rear support braces for the strongest car possible.
Fabricated from rectangular steel tubing, the Camaro crossmember also houses provisions for a Speedtech Torque Arm front pinion pin mount and doubles as a drive shaft safety loop. Because they're integrated into the floor pan, the rails are hardly visible from underneath the car and don't sacrifice any ground clearance.
Installation does require some modification to the floor pan (see instructions link below) however it does not affect factory seat mounting locations. Our frame connecters are supplied with easy to follow detailed instructions including several clear photos and diagrams. This kit comes in bare steel for ease of welding into the car.
'67-69 Camaro, Firebird
Fits with factory GM and most all aftermarket subframes.