Power Rack and Pinion Steering 1967-1969 F Body
Looking to upgrade your old school steering to a modern feel and performance? The Speedtech 1967- 1969 Camaro and Firebird Power Rack & Pinion unit has been specially modified to work with the first generation F Body sub frame, including being internally shortened to reduce the width of the ball centers. By narrowing these pivot points, the rack & pinion pivots in the same position as the upper and lower control arms of a stock Camaro. Replicating the dimensions of the stock steering results in precision rack & pinion steering with very little bump steer! This unit is available in black and chrome finish.
This 67'-69' F Body rack and pinion is a bolt-in kit designed for ease of installation, no welding or chassis modification is required. The unit comes mounted to its own unique bracket that mounts on the rear of the frame cross member. To install the rack and pinion, simply remove the existing rearward lower control arm bolts and replace them with the provided longer bolts. Place the rack and pinion into position and tighten the new control arm bolts. Finally remove and replace the stock steering arms with the new steering arms provided and attach the new outer tie-rod ends to the arms.
- Power Assist type design.
- Simple bolt-in installation.
- Quick ratio feel.
- Lighter weight than factory steering.
- Nearly eliminates Bump Steer.
- Includes custom engineered steering arms.
If you’re using a stock/factory steering column you will need to purchase a steering column adapter. This adapter replaces the factory rag joint with a solid 1" 48 spline mount.
This Double U-joint Steering Shaft Kit is designed to facilitate the installation of Unisteer's Rack & Pinion kit in '67-'69 Camaros and Firebirds with power steering. Included in the kit are two U-Joints and one section of shaft. Available with a 1" 48 spline input, this kit works with factory steering columns with the above adapter or aftermarket columns with the 1" 48 spline configuration. If you have a different column please call us to see if we have a shaft kit available in your configuration. This kit is designed to work specifically with Speedtech brand high clearance custom fitted headers. For more info on our headers, > click here <.
This Triple U-joint Steering Shaft Kit is designed to facilitate the installation of Unisteer's Rack & Pinion kit in '67-'69 Camaros and Firebirds with power steering and aftermarket headers. Included in the kit are three U-Joints, two sections of 3/4" round shaft, support bearing, and frame mount bearing bracket. Note: even with the 3 joint shaft there may be some additional fab work required with some headers. Available with a 1" 48 spline input, this kit works with factory steering columns with the above adapter or aftermarket columns with the 1" 48 spline configuration.
Application: '67-69 Camaro, Firebird
**When ordering a steering shaft kit, please call us at 435-628-4300 to be sure you get the proper part number for your application.